“I have ordered several vinyl sticker sets over the years and every time the product and service have been excellent. The first set have been on my son's walls for 10 years and he still loves them. Highly recommended.”
How to Install your Wall Stickers
WHAT’S IN THE TUBE?
Your decal arrives in three layers:
- Application tape – holds the design together
- Vinyl decal Sticker – your actual sticker
- Backing paper – protects the adhesive
- Application leaflet - So you know how to install
These layers allow for accurate, bubble-free application.
SURFACE PREP
For best results, only apply to smooth, clean, dry surfaces.
Clean the area thoroughly and allow to dry.
⚠️ If your wall has been freshly painted, wait at least 3 weeks before applying.
Unroll your decal and gently flatten it. Check the design before installation.
POSITIONING
Hold the wall sticker against the wall with the backing still on
Use small pieces of masking tape to hold it in place
Step back and check spacing, height, and alignment
APPLYING YOUR DECAL
1. Create a hinge
Run a strip of masking tape across the middle of the decal to hold it in position.
2. Peel & apply the first half
Lift one side, peel away the backing paper, then carefully lay the decal back onto the wall.
Using your card, press firmly from the centre outward.
REPEAT
3. Repeat for the other half
Remove the remaining backing paper and smooth the rest of the decal onto the surface.
Apply firm pressure across the whole design.
4. Remove the top tape
Slowly peel away the clear application tape at a sharp angle.
If any part lifts, lay it back down, rub firmly, and peel again more slowly.